new product se10pb thru se10pj vishay general semiconductor document number: 89024 revision: 26-may-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 1 surface mount esd capability rectifiers features ? very low profile - typical height of 1.0 mm ? ideal for automated placement ? oxide planar chip junction ? low forward voltage drop ? typical i r less than 0.1 a ? esd capability ? meets msl level 1, per j-std-020, lf maximum peak of 260 c ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec typical applications general purpose, polarity protection, and rail-to-rail protection in both consumer and automotive applications. mechanical data case: do-220aa (smp) epoxy meets ul 94v-0 flammability rating terminals: matte tin plated leads, solderable per j-std-002 and jesd22-b102 e3 suffix for consumer grade, meets jesd 201 class 1a whisker test polarity: color band denotes the cathode end primary characteristics i f(av) 1.0 a v rrm 100 v to 600 v i r 5 a v f at i f = 1.0 a 0.86 v t j max. 175 c do-220aa (smp) esmp tm series notes: (1) pulse test: 300 s pulse width, 1 % duty cycle (2) pulse test: pulse width 40 ms maximum ratings (t a = 25 c, unless otherwise noted) parameter symbol se10pb se10pd se10pg se10pj unit device marking code 10b 10d 10g 10j maximum repetitive peak reverse voltage v rrm 100 200 400 600 v average forward current (fig. 1) i f(av) 1.0 a peak forward surge current 10 ms single half sine-wave superimposed on rated load i fsm 25 a operating junction and storage temperature range t j , t stg - 55 to + 175 c electrical characteristics (t a = 25 c, unless otherwise noted) parameter test conditions symbol typ. max. unit maximum instantaneous forward voltage (1) i f = 1.0 a, i f = 1.0 a, t j = 25 c t j = 125 c v f 0.960 0.860 1.05 0.95 v maximum reverse current (2) rated v r t j = 25 c t j = 125 c i r - 4.8 5.0 50 a typical reverse recovery time i f = 0.5 a, i r = 1.0 a, i rr = 0.25 a t rr 780 - - typical junction capacitan ce time 4.0 v, 1 mhz c j 7.0 - pf
new product se10pb thru se10pj vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 89024 revision: 26-may-08 2 note: (1) thermal resistance from junction to ambient and junction to lead mounted on p.c. b. with 5.0 x 5.0 mm copper pad areas. r jl is measured at the terminal of cathode band. r jc is measured at the top center of the body notes: (1) immunity to iec-61000-4-2 air discharge mode has a typical performance > 30 kv (2) system esd standard ratings and characteristics curves (t a = 25 c unless otherwise noted) thermal characteristics (t a = 25 c, unless otherwise noted) parameter symbol se10pb se10pd se10pg se10pj unit typical thermal resistance (1) r ja r jl r jc 105 25 30 c/w immunity to electrical static di scharge to the following standards (t a = 25 c, unless otherwise noted) standard test type test conditions symbol class value aec q101-001 human body model (cont act mode) c = 100 pf, r = 1.5 k v c h3b > 8 kv aec q101-002 machine model (contact mode) c = 200 pf, r = 0 m4 > 400 v jesd22-a114 human body model (contact mode) c = 150 pf, r = 1.5 k 3b > 8 kv jesd22-a115 machine model (contact mode) c = 200 pf, r = 0 c > 400 v iec-61000-4-2 (2) human body model (contact mode) c = 150 pf, r = 150 4> 8 kv human body model (air-discharge mode) (1) c = 150 pf, r = 150 4 > 15 kv ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode se10pj-e3/84a 0.024 84a 3000 7" diameter plastic tape and reel se10pj-e3/85a 0.024 85a 10 000 13" diameter plastic tape and reel figure 1. maximum forward current derating curve 0 0.2 0.4 0.6 0. 8 1.0 1.2 0 25 50 75 100 125 175 150 lead temperat u re (c) a v erage for w ard c u rrent (a) t l meas u red at the cathode band terminal resisti v e or ind u cti v e load figure 2. forward power loss characteristics 0 0.2 0.4 0.6 0. 8 1.2 1.0 0 0.2 0.4 0. 8 1.0 1.2 0.6 a v erage for w ard c u rrent (a) a v erage po w er loss ( w ) d = 0.1 d = 0.2 d = 0.3 d = 0.5 d = 0. 8 d = 1.0 d = t p /t t p t
new product se10pb thru se10pj vishay general semiconductor document number: 89024 revision: 26-may-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 3 package outline dimensions in inches (millimeters) figure 3. typical instantaneous forward characteristics figure 4. typical revers e leakage characteristics instantaneo u s for w ard v oltage ( v ) instantaneo u s for w ard c u rrent (a) 10 1 0.1 0.5 0.7 0.9 1.1 1.3 1.5 t j = 175 c t j = 150 c t j = 25 c 100 10 1 0.1 0.01 10 20 30 40 50 60 70 8 0 90 100 percent of rated peak re v erse v oltage ( % ) instantaneo u s re v erse c u rrent ( a) t j = 175 c t j = 150 c t j = 25 c figure 5. typical junction capacitance re v erse v oltage ( v ) j u nction capaci tance (pf) 100 10 1 0.1 0.1 1 10 100 t j = 25 c f = 1.0 mhz v sig = 50 m v p-p do-220aa (smp) cathode b and 0.0 8 6 (2.1 8 ) 0.074 (1. 88 ) 0.142 (3.61) 0.126 (3.19) 0.15 8 (4.00) 0.146 (3.70) 0.013 (0.35) 0.004 (0.10) 0.012 (0.30) 0.000 (0.00) 0.01 8 (0.45) 0.006 (0.15) 0.045 (1.15) 0.033 (0. 8 5) 0.036 (0.91) 0.024 (0.61) 0.032 (0. 8 0) 0.016 (0.40) 0.103 (2.60) 0.0 8 7 (2.20) 0.053 (1.35) 0.041 (1.05) 0.012 (0.30) ref. 0.100 (2.54) 0.105 (2.67) 0.025 (0.635) 0.030 (0.762) 0.050 (1.27)
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
